Slate Roof Repairs Made Easy-New methods of Home Improvement

When the slate is first placed in the roof, they are often nailed with two nails that hold them in place. When the slate is damaged or crumbled it can cause all sorts of problems. Luckily you can have your roof repaired in a variety of ways by professionals. The disadvantage of this is actually the cost of repairs. Getting new slates is often not expensive, but it does cost a fortune to put the old ones out to repair the tile roof repair.

There are many companies which offer slate roof repairs in Melbourne that slide under the slate and find two nails. Once found you can use the other side of the ripper to pull the nail in and out with a few bumps at the bottom of the tool. It doesn’t bite the nail; it actually cuts it out completely. There is an accurate way to do this so that you do not break the slate (which will make it difficult to pull out all the way!) Once you remove the nail the slate will slide out easily.

Slate roof repairs with ease

The next step of slate roof repairs in Melbourne is just as simple. You place the slate where it goes, mark the bottom of the slate (where it sticks) with chalk and then pull it out. You will then take the slate repair hook to the crease between the two slates below that level and gently hammer it there. This is a flat surface with a hook at the end that holds the end of the slates in place. Once you have the hook you put the slate back on and put it on the hook.

The hook will move slightly forward than the slate needs to sit. This is good because now you will tap the hook until it flushes and holds the slate firmly. Part of the cake! You can do it yourself and save money. All of these parts can be found at your local home improvement store. You will need new slates, ripper tools, slate hooks and a small hammer. Who knows, maybe you’re good enough at it that you can take your customers!

Why to use slate for roofing?

Slate is considered the best material for roofing. This is considered a 100-year-old roof and will definitely live up to its reputation. If you properly install and maintain the slate as your roofing material, you can expect a lifespan of 75 to 200 years.

However, this wonderful roof is not entirely immune to damage and deterioration over the years. It is important that you have your roof inspected professionally once a year to see if you need any slate roof repairs. Only use a contractor with experience and knowledge of this type of material.

Avoid leaks

If you see a leak in your home and you think you may need some slate roof repairs, the first step is to take a look at the actual surface. You can survey roof surfaces for any irregularities without climbing stairs. If there is a missing or broken slate it will need to be replaced.

Prevent natural colour

If a leak occurs around a pipe, vent, chimney, or other penetration elements, you will need someone to examine the area more closely. The best advice for you is not to do it yourself. The surface of the slate is unstable to walk by its nature. And if repairs are needed, you can't even try to do them yourself.

Better protection to attic

One trade trick to determine if you need any slate roof repairs is to check the attic for dust. Yes, the attic is covered with all kinds of small particles. For this test you need to determine if what you are looking at is slate dust.

Prevent Flaking of surface

This is a sure sign of deterioration as there is the presence of flaking on the outer surface, which can end up on the sides of the house or on the ground in the gutter.

Smoothens the edges

The most sensitive parts that will cause you to have a slate roof repaired are the surrounding elements. Flaking that is used on all penetration parts as well as valleys and edges will probably be the first thing that needs to be repaired. These components are made of metal and will not last as long as slate.

Final thoughts

Flaking can be seen above the slate application, but it can also be seen under the stone. It can have damage or corrosion and you won’t notice it until you see a leak. This is not the work of amateurs among us. There are many skills and techniques to fix these problems safely and properly. Leave it to the professionals. For more information to contact Top Tier Slate Roofing.